Product Description DYLON Image Maker transfers monochrome and coloured photocopies onto any washable fabric. You’ll need: – A colour or black and white photocopy – DYLON Image Maker – Paper Towels – Rolling Pin Instructions: 1. All the time wash and dry chosen garment (even though it is new). Place a protective backing underneath the design area, (e.g. a piece of cardboard or an unprinted plastic bag) to prevent the Image Maker seeping through. 2. Place image printed side up on a covered work surface. Squeeze a generous amount of Image Maker onto the picture and the use of a clean brush, spread paste over the whole image. The paste must be thick enough that the image cannot be seen clearly. 3. Place the image on the fabric, paste side down. Smooth the paper down to make sure that there are no wrinkles. Place a paper towel over the transfer and use a rolling pin to lightly press the paper onto the fabric, rolling in alternate directions for about 1 minute. Blot off any excess paste with the paper towel. 4. Allow to dry thoroughly (at least 4 hours, preferably overnight). 5. When dry, wet the paper thoroughly with a water soaked sponge. With your finger or sponge, gently begin rubbing until the top layer of the paper may also be rolled off. 6. Leave the garment to dry. Remove the rest of the fuzz from the image the use of a damp sponge. 7. Allow your garment to dry thoroughly. Place a couple of drops of Image Maker onto your image and rub in gently with a piece of cloth to seal the transferred image. 8. Allow the image to dry thoroughly. Do not wash garment within the first 72 hours. Washing Instructions: Wash item by hand in lukewarm water or in a washing machine, on a 30C gentle cycle. Turn garment inside out prior to washing. Dry garment flat. Do not dry clean and do not iron directly onto the image.

Transfers photocopies onto fabric
Can be utilized with colour or black and white photocopies
50ml tube